產品用途：

，用來測試材料結構或復合材料，在瞬間下經*溫及極低溫的連續環境下所能忍受的程度，藉以在zui短時間內試驗其因熱脹冷縮所引起的化學變化或物理傷害。適用的對象包括金屬、塑料、 橡膠，電子……等材料，可作為其產品改進的依據或參考。

產品規格表

產品特點：

●待測品不動（氣體）冷熱沖擊試驗機 
Air flow from preheat & pre-cool zones for shocking action while pecimen keep stationary in testing zone. 
●二箱或三箱式可程式控制模式 
Programmable control is for two zones & three zones test. 
●出風口號回風口感知器檢知控制 
The control is checked by the average value of the outlet & inlet's sensors. 
●150（60℃）~（-10）-65℃.測試范圍 
Testing temp.range is 150（60℃）~（-10）-65℃. 
●10 sec 內風向柵門機構切換時間 
The transfer time is within 10 seconds. 
●5 min 內冷熱沖擊溫度恢復時間 
The recovery time is within 5 minutes. 
●50%省電效率與自動伺服機. 
Economize electricity of attrition is 50% efficiently that is serving control automatically. 
●IPC工業電腦控制器 
Industrial person computer is for the controller. 
●LCD中文/英文可切換液晶顯示器 
Alphabetical LCD display by English-Chinese. 
●Help操作說明List 簡易表單操作 
Exlain any screen operation is by a “Help" key & simple operated list. 
●遠端監控管理系統 
Two way remote control & measurement management systerm. 
●RAMP 等（均）溫度加速壽命試驗機 
RAMP temp,chamber. 
●LN2V液態氮愉速降溫控制裝置 
LN2 serving control injection is for ramp temp.control.